Soil Moisture Sensor
TEROS-10
If a verification clip is not available, test basic sensor functionality in air and water. The TEROS-10 will read ~0.64 m3/m3 in water and a slightly negative value in air.
Note: The sensors are optimzed to read in soils, therefore the sensor will not read 100% in pure liquid water. Values above use the mineral soil calibration.
Installation Tool:
Proper installation of the sensors is critical for proper operation. Refer to the TEROS-10 User Manual for details. For easy installation, use the borehole installation tool. The installation tool (shown below) is available for rent from us.
This product is already in quote request list
Description
Preparation:
Inspect and verify TEROS-10 components. The TEROS verification clip gives the best assessment of proper sensor function and accuracy. The TEROS-10 should read 0.35 to 0.42 m3/m3 on the verification clip.
If a verification clip is not available, test basic sensor functionality in air and water. The TEROS-10 will read ~0.64 m3/m3 in water and a slightly negative value in air.
Note: The sensors are optimzed to read in soils, therefore the sensor will not read 100% in pure liquid water. Values above use the mineral soil calibration.
Installation Tool:
Proper installation of the sensors is critical for proper operation. Refer to the TEROS-10 User Manual for details. For easy installation, use the borehole installation tool. The installation tool (shown below) is available for rent from us.
Documentation
TEROS-10_SPEC