NEWS

Types of Anaerobic Chambers

The anaerobic chamber is one of the best solutions for incubating anaerobes, i.e., bacteria that can live in the absence of oxygen. Also known as a laboratory glove box, the anaerobic chambers are designed to improve the culturing and the identification process for drug discovery and infectious diseases.

We have years of experience In the design, development & production of anaerobic workstations. We can also offer a bespoke design service in accordance with our customers specific requirements. The cabinets incorporate many advanaced features which vary significantly from other cabinets on the market. The cabinets are fabricated from high quality acrylic material to give good thermal insulation, ergonomic design & a incorporating an unobstructed viewing area.

Types of Anaerobic Chambers

1.

AW200SG

The AW200SG is the smallest of MUNRO’s range of Anaerobic workstations. It is ideal for the laboratory
where oxygen free conditions are required for the growth and identification of bacteria. Its small bench
size makes the AW200SG ideal for the individual research project.
The unit will incubate 220 petri dishes and has a 10 dish transfer port. The workstation operates from a
single cylinder of anaerobic mixed gas and is very economical on gas usage.
The product comes complete with automatic humidity control, oxygen indicator equipment, internal
mains socket, spotlight, catalyst, plate holders and gauntlets. It is ready to work once it is plugged into its
electricity and gas supplies.
Top Plate Access: The transfer port is situated on top of the workstation and will hold 10 petri dishes.
This will allow rapid transfer of dishes both into and out of the incubator. The positive pressure inside the
cabinet and the doors at each end of the lock, together with the fast acting gas inlet switching, ensures
that the workstation remains anaerobic at all times.
AW200SG  Small & Compact
Glove Free Operation: This unique bare hand method is very
simple to operate. Air-tight seals fit around the user’s wrists
as shown and the anaerobic atmosphere is maintained. The
design eliminates the use of footswitches & gets rid of
large internal arm port bungs, giving more working
room inside the incubator. The system is very
economic on gas usage and the hands can be
inserted in seconds.

Controls: The unit works automatically without the use of footswitches or pushbuttons and the controls are not
needed for routine operation.
Admitting Equipment: Equipment can be placed inside the incubator through the arm ports prior to
commissioning.
Anaerobic Indication: A small pump together with an oxygen-sensitive liquid indicator is provided with the
workstation.
Bench Area: The workstation occupies a minimum amount of bench area and is completely self contained.
Visibility: The visibility is excellent. Four of the cabinet’s surfaces are transparent and this is further enhanced
by a narrow angle, low voltage spotlight. There are no folds in the front viewing window to obstruct clear
vision.
Working Position: Working inside the incubator is very comfortable & all parts can be reached without effort.
Construction: The unit is made using high quality acrylic and the seams are welded to ensure leak-free joints.
Temperature: The temperature is controlled by an adjustable electronic controller and an internal digital
thermometer displays the temperature.
Humidity: The R.H. within the incubator is controlled by a humidistat and fan cooled condensation plate
situated at the rear. The distillate is collected in a drainable bottle.
Internal Power Socket: A mains socket is provided to facilitate the use of electrical equipment inside the
chamber.
Earth Leakage Circuit Breaker: The workstation is fitted with a safety device to protect the operator against
electric shock.
The AW200SG can also be used as a microaerophylic incubator by using an alternate gas supply

Types of Anaerobic Chambers

2.

AW300SG

The AW300SG anaerobic chamber is ideal for the laboratory where oxygen free conditions are required for
the growth and identification of bacteria. Its small bench size yet large incubation capacity makes it perfect
for the individual research project. The unit is very economical to operate and works from a single cylinder of
anaerobic mixed gas. The cabinet will incubate 300 Petri dishes and comes complete with catalyst sachets and
plate holders.
Top Plate Access: The interior of the workstation can be accessed in two ways. Single Petri dishes can be
admitted through the transfer port situated at the front of the cabinet, whilst a larger lock is provided on the
top of the unit which will hold ten dishes.
The positive pressure inside the incubator and the doors at each end of the locks together with fast
acting gas inlet switching, ensures that the unit remains anaerobic at all times.
Glove Free Operation: Our unique bare hand
method is very simple to operate; air tight sealsfit
around the users wrists as shown and the anaerobic
atmosphere is maintained. The design eliminates the
use of footswitches and gets rid of the large internal
port bungs giving much more working room within the
incubator. The system is also very economic on
gas usage.

Controls: The unit works automatically without the use of footswitches or pushbuttons and the controls are not
needed for routine operation. Admitting Equipment:- Electric shakers and stirrers etc., can be placed inside the
incubator through the arm ports prior to commissioning.
Anaerobic Indication: A small pump together with an oxygen-sensitive liquid indicator is provided with the
workstation.
Bench Area: The workstation occupies a minimum amount of bench area, is portable and completely self
contained.
Visibility: The visibility inside the incubator is excellent. Six of the cabinet’s surfaces are transparent and this is
further enhanced by a narrow angle, low voltage spotlight. There are no folds in the front viewing window to
obstruct clear vision.
Gas Control: The internal gas pressure is controlled electronically and a gas leak detector and alarm are built
into the circuitry.
Working Position: Working inside the incubator is very comfortable & all parts can be reached without effort.
Construction: The unit is made using high quality acrylic and the seams are welded to ensure leak-free joints.
Temperature: The temperature is controlled by an adjustable electronic controller which incorporates an
integral digital thermometer.
Humidity: The R.H. within the incubator is controlled by a humidistat and fan cooled condensation plate
situated at the rear. The condensation is collected in a removable bottle.
Internal Power Socket: A mains socket is provided to facilitate the use of electrical equipment inside the
chamber.
Earth Leakage Circuit Breaker: The workstation is fitted with a safety device to protect the operator against
electric shock. The AW300SG can also be used as a microaerophilic incubator by using an alternate gas supply.

Types of Anaerobic Chambers

3.

AW400TG

This range of workstations is ideal for the laboratory where oxygen free conditions are required for the growth
and identification of bacteria.
The careful configuration gives the units a small bench area yet ample working room within the incubator. The
AW400TG is particularly economic to run due to its dual gas design, comes complete with catalyst sachets and
plate holders and requires only electricity and gas supplies to be fully functional.
Glove Free Operation: Our unique bare hand method is very simple to operate; air tight seals fit around
the users wrists as shown and the anaerobic atmosphere is maintained. The design eliminates the use of
footswitches & gets rid of the large internal port bungs giving much more working room within the incubator.
This system is also very economic on gas usage.
A large transfer port is fitted to the units which holds 60 Petri dishes. The outer door is hinged to reduce the
overall length and the inner door slides to maximize the incubation capacity. Both doors are fitted with wear
compensating seals. The units are also fitted with a single-plate entry system, situated between the arm ports
at the front of the incubator. Individual Petri dishes can be passed quickly into the incubator with minimal gas
usage.

Types of Anaerobic Chambers

5.

AW500TG

This range of workstations is ideal for the laboratory where oxygen free conditions are required for the
growth and identification of bacteria. The careful
configuration gives the units a small bench area yet ample working room within the incubator. The
AW500TG is particularly economic to run due to its dual gas design, comes complete with catalyst sachets
and plate holders and requires only electricity and gas supplies to be fully functional.
Glove Free Operation: Our unique bare hand method is very simple to operate; air tight seals fit around
the users wrists as shown and the anaerobic atmosphere is maintained. The design eliminates the use of
footswitches & gets rid of the large internal port bungs giving much more working room within the incubator.
This system is also very economic on gas usage.
A large transfer port is fitted to the units which holds 60 Petri dishes. The outer door is hinged to reduce the
overall length and the inner door slides to maximize the incubation capacity. Both doors are fitted with wear
compensating seals. The units are also fitted with a single-plate entry system, situated between the arm ports
at the front of the incubator. Individual Petri dishes can be passed quickly into the incubator with minimal gas
usage.

Types of Anaerobic Chambers

 

6.

AW800TGRF4P

The AW800TGRF4P is the largest workstation in the
Munro range. One of the main advantages of the unit
is that despite its large capacity, it only occupies a
modest amount of bench area. The workstation is very
economical to run, as two gas supplies are used. The
AW800TGRF4P will comfortably incubate up to 800
Petri dishes and comes complete with catalyst and
plate holders.
Glove Free Operation: Our unique bare hand
method is very simple to operate; air tight seals fit
around the users wrists as shown and the anaerobic
atmosphere is maintained. The design eliminates the
use of footswitches and gets rid of the large internal
port bungs giving much more working room within
the incubator.
This system is also very economic on gas usage.
A large transfer port is fitted to the units which holds
60 Petri dishes. This port is automatically pressure
pulse flushed & is fitted with a catalyst. The doors of
the port are automatically sealed, locked and
programmed to prevent loss of anaerobiosis. We also
offer the option of an additional ten-plate entry
system, in order that a small number of Petri dishes
can be passed quickly into the incubator with a
minimal gas usage.

Controls: The unit works automatically without the use of footswitches or pushbuttons and the controls are not needed for routine operation

. Admitting Equipment: Electric shakers and stirrers etc., can be placed inside the incubator through the arm ports prior to commissioning.

Anaerobic Indication: A small pump together with an oxygen-sensitive liquid indicator is provided with the workstation.

Bench Area: Careful configuration gives the unit a very large capacity, whilst keeping the bench area to a minimum.

The Control Panel: The control panel indicates the workstation’s operating status and audible alarms register gas leaks, low gas pressure and mains failure. The whole system is under the control of a programmable logic controller.

Working Position: Working inside the incubator is very comfortable and all parts can be reached without effort.

Construction: The unit is made using high quality acrylic and the seams are welded to ensure leak-free joints.

Temperature: The temperature is controlled by an adjustable electronic controller and an internal digital thermometer displays the temperature.

Humidity: The R.H. within the incubator is controlled by a humidistat and fan cooled condensation plate
situated at the rear. The condensation is collected in a removable bottle.
Shelving: The workstation can also be fitted with sliding shelves as an optional extra.
Visibility: The visibility into the incubator is excellent. There are no folds in the front panel to obstruct clear
vision and this is further enchanced by good lighting.
Earth Leakage Circuit Breaker: The workstation is fitted with a safety device to protect the operator against
electric shock

Types of Anaerobic Chambers

Other News stories that my interest you
Marketing the Weather

METEOROLOGY
Marketing the Weather
Indoor Air Quality

AIR QUALITY
Indoor Air Quality